Slurry Circulating Pump

Product details

Introduction

ZJ slurry circulating pump is a heavy duty pump, Applied in abrasive liquids.It is used to transport liquids with solid particles, such as ore, lime, coal, sand, quartz, etc. or high concentration mud.

Material

FeCr30, Cr26, Cr20, Cr12, A49, A532, Dual phase steel 2205，Rubber liner

Seal Type

Packing seal or Mechanical seal or Auxiliary impeller

Lubrication

Oil bath lubrication or Grease lubrication

Connection mode

V-belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, variable frequency drive, etc

Working principle

ZJ slurry circulating pump under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and obtains energy, leaving the outer edge of the impeller at high speed and entering the volute pump housing. In the volute pump casing, the liquid decelerates due to the gradual expansion of the flow channel, converts part of the kinetic energy into static pressure energy, and finally flows into the discharge pipe at a higher pressure and is sent to the required place. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Since the pressure above the liquid level of the storage tank is greater than the pressure at the inlet of the pump, the liquid is continuously pressed into the impeller.

Structure

Application

http://www.waterpumpmanufacturer.com/